⛽Oil Extractor Pump 12V 80W, Upgraded DIY Oil Change Pump w/ Auto Overload

Make routine engine oil removal easier with the oil extractor pump for oil change. The 12V DC, 80W electric motor powers extraction through an accessible dipstick tube on compatible engines, without hand pumping or removing the oil drain plug for the extraction step. The built-in switch puts start and stop control on the pump. Monitor the hose and collection container during use, and switch off when needed. Overcurrent protection shuts the pump off when triggered; it is not an oil-level sensor or automatic overflow control. Use this oil pump extractor for compatible motor oil, gear oil and transmission fluid applications within the operating limits in the instructions. Check fluid suitability and dipstick access before use. The specified motor oil flow rate is up to 0.5 L/min; actual flow depends on oil viscosity, temperature and hose setup. For compatible cars, motorcycles, lawn mowers and boats. 

Built-in Power Switch

The oil change pump is designed with a one-touch emergency stop to prevent spills from hose slip-offs or overfilling. Helps avoid accidental start-ups and reduces plug-in arcing to extend motor life.

Fast & Clean Topsider Oil Change

Upgrade to a cleaner, easier way to do DIY synthetic oil changes and vehicle fluid maintenance. This electric pump extracts oil directly through the dipstick tube—no crawling under vehicles, removing drain plugs, or manual pumping.

Upgrade Overcurrent Protection

This oil extractor pump features upgraded flow capabilities and overcurrent protection, powering off if foreign objects are detected. With a copper motor for fast, stable suction, it ensures efficient extraction.

Application

This oil extractor pump is ideal for DIY synthetic oil changes. Extracts motor oil, gear oil, and transmission fluid for cars, motorcycles, lawn mowers, boats, and Jet Skis. (Not for gasoline, diesel, or water).

12V DC, 80W performance

Use this 12V oil extractor pump for DIY maintenance with a specified motor oil flow rate of up to 0.5 L/min. Actual extraction speed varies with oil viscosity, temperature and hose setup

What's In The Box

• 1 Oil Extractor Pump
  
• 1 Inlet Hose
  
• 1 Outlet Hose
  
• 2 Hose Clamps
  
• 2 Battery Clamps

FAQs

Q：What liquids can this pump handle?

A：Suitable for warm engine oil (0W-20, 5W-20, 5W-30, 10W-30, 10W-40), Light gear oil (75W-80, 75W-90), transmission fluid, and diesel.
High-viscosity oils may pump more slowly.

Q：What should I do before using the pump?

A：Preheat the engine to 40–60°C before extracting old oil.
Cold oil is thick and hard to pump, which can cause the motor to draw excessive current and trigger the protection cut-off. Let the pump cool, then it will work normally.

Q：Why does the oil sometimes fail to extract?

A：The pump is drawing air.
When pumping from the dipstick tube, move the suction hose up and down to ensure the tip is fully submerged. If the tip is partially exposed, the pump will draw air instead of oil.

Q：What size of the hoses?

A：Inlet hose: 4 ft (6mm OD, 4mm ID)
Outlet hose: 5 ft (12mm OD, 9mm ID)